YASKAWA E-7S SERVOPACK SGD7S Product Manual page 636

SigmaWin+
Button in
Menu Name [Unit]
Dialog Box
Installation Environment Monitor −
SERVOPACK
Installation Environment Monitor −
*2
Servomotor
Service Life Prediction Monitor −
Service
Built-in Fan
Life Moni-
Service Life Prediction Monitor −
tor
Capacitor
Service Life Prediction Monitor −
Surge Prevention Circuit
Service Life Prediction Monitor −
Dynamic Brake Circuit
Product
Motor − Resolution
Informa-
tion
–
–
–
*1.
You can use Un010 to monitor the upper limit setting for the maximum motor speed or the upper limit setting for
the encoder output resolution.
You can monitor the upper limit of the encoder output resolution setting (Pn281) for the current maximum motor
speed setting (Pn385), or you can monitor the upper limit of the maximum motor speed setting for the current
encoder output resolution setting.
Select which signal to monitor with Pn080 = n.X (Calculation Method for Maximum Speed or Divided Out-
put Pulses).
• If Pn080 = n.0, the encoder output resolution (Pn281) that can be set is displayed.
• If Pn080 = n.1, the maximum motor speed (Pn385) that can be set is displayed in mm/s.
*2.
This applies to the following motors. The display will show 0 for all other models.
SGM7J, SGM7A, SGM7P, SGM7G, SGM7E, SGM7F, and SGMCV
17.1 Corresponding SERVOPACK and SigmaWin+ Function Names
17.1.2 Corresponding SERVOPACK Monitor Display Function Names
Un No. Name [Unit]
SERVOPACK Installa-
Un025 tion Environment Moni-
tor [%]
Servomotor Installation
*2
Environment Monitor
Un026
[%]
Built-in Fan Remaining
Un027
Life Ratio [%]
Capacitor Remaining
Un028
Life Ratio [%]
Surge Prevention Circuit
Un029 Remaining Life Ratio
[%]
Dynamic Brake Circuit
Un02A Remaining Life Ratio
[%]
Linear Encoder Pitch
(Scale pitch = Un084 ×
Un084
Un085
10 [pm])
Linear Encoder Pitch
Exponent (Scale pitch =
Un085
Un084 × 10
Rated Motor Speed
Un020
-1
[min ]
Maximum Motor Speed
Un021
-1
[min ]
Continued from previous page.
SERVOPACK
Serial Command
–
Un085
[pm])
17
17-7