YASKAWA E-7S SERVOPACK SGD7S Product Manual page 70

Item
Sequence
I/O Signals Output
Signals
Interfaces
Digital
1:N
Opera-
Communi-
tor Com-
cations
municati
Axis
ons
Communi-
Address
(CN3)
cations
Setting
USB Interface
Commu-
Communi-
nica-
cations
tions
Standard
(CN7)
SERVOPACK
Displays/
Indicators
INDEXER Module
Fixed Allowable voltage range: 5 VDC to 30 VDC
Out- Number of output points: 1
puts Output signal: ALM (Servo Alarm Output) signal
Allowable voltage range: 5 VDC to 30 VDC
Number of output points: 3
(A photocoupler output (isolated) is used.)
Output signals:
• /WARN (Warning Output) signal
• /BK (Brake Output) signal
• /S-RDY (Servo Ready Output) signal
• /ALO1, /ALO2, and /ALO3 (Alarm Code Output) signals
Signal allocations and positive or negative logic can be changed in the
parameters.
Allowable voltage range: 5 VDC to 30 VDC
Number of output points: 9
Output signals:
• /INPOSITION (Positioning Completion Output) signal
• /POUT0 (Programmable Output 0) signal
Fixed
• /POUT1 (Programmable Output 1) signal
Out-
• /POUT2 (Programmable Output 2) signal
puts
• /POUT3 (Programmable Output 3) signal
• /POUT4 (Programmable Output 4) signal
• /POUT5 (Programmable Output 5) signal
• /POUT6 (Programmable Output 6) signal
• /POUT7 (Programmable Output 7) signal
Digital Operator (JUSP-OP05A-1-E)
Up to N = 15 stations possible for RS-422A port
Set with parameters.
Personal computer (with SigmaWin+)
Conforms to USB2.0 standard (12 Mbps).
CHARGE and PWR indicators, and one-digit seven-segment display
Refer to the following section for detailed information.
1.5.2 Indicators on page 1-11
2.1 Ratings and Specifications
2.1.4 Specifications
Continued from previous page.
Specification
Continued on next page.
2
2-9