YASKAWA E-7S SERVOPACK SGD7S Product Manual page 459

13.4 Jog Speed Table Operation
13.4.4 SigmaWin+ Procedures
This concludes the writing procedure.
Saving the Jog Speed Table
 Saving the Jog Speed Table to Flash Memory in the SERVOPACK
To prevent the jog speed table from being deleted when the power supply to the SERVOPACK
is turned OFF, you must save it to flash memory in the SERVOPACK. The jog speed table that
is saved in the flash memory is automatically loaded each time the power supply is turned ON.
There are the following three ways to save the jog speed table to flash memory in the SERVO-
PACK.
• Save it from the Jog Speed Table Editing Dialog Box.
• Save it with the JSPDSTORE serial command.
• Save it with FnB05 (Edit/Save Jog Speed Table) on a Digital Operator.
Use the following procedure to save the jog speed table from the Jog Speed Editing Dialog
Box.
1.
Click the Save Button on the Jog Speed Table Editing Dialog Box.
The Save Table Dialog Box will be displayed.
13-48