Jog Mode Operation (Fn002) - YASKAWA Sigma-V Series User Manual

3 Utility Function Mode

3.3.2 JOG Mode Operation (Fn002)

3.3.2

JOG Mode Operation (Fn002)

(1) Conditions that Disable This Function
(2) Display Example
B B
F n 0 0 0 : A l m H i s t o r y
F n 0 0 2 : J O G
F n 0 0 3 : Z − S e a r c h
F n 0 0 4 : P r o g r a m J O G
3-10
The servomotor rotates in the forward or reverse direction by using the
operation keys on the digital operator.
For safety, execute JOG operation without connecting a load to the servomotor
(without connecting the servomotor shaft to a machine). And, fix securely the
servomotor mounting surface on a machine to prevent the motor overturning.
Turn OFF the power supply of the host controller, or disconnect the power
supply to the host controller.
This function is disabled by the following settings.
• When the Write Prohibited Setting (Fn010 = 0001) is set.
• When/S-ON (Servo ON) input signal is ON. The display does not switch to
the execution display of JOG mode operation.
− F U N C T I O N −
Same as the Parameter/Monitor Mode display, four items including parameters
and monitor modes can be displayed on one screen in the JOG Mode Operation
display.
Also, the parameter settings can be changed while the servo is OFF.
After having selected the parameters and monitor modes to be displayed, and
then press the
B B
P n 3 0 4 = 0 0 5 0 0
U n 0 0 0 =
U n 0 0 2 =
U n 0 0 D =
Key. The display with the selected items will be saved.
− J O G −
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0