Global Commands - YASKAWA E-7S SERVOPACK SGD7S Product Manual

14.5 Global Commands

14.5 Global Commands
Global commands are commands that are sent to all axes at the same time.
Command (Host controller → INDEXER Module)
"*"
The axis number setting "*" is the global address and
addresses all axes.
No echoback or response is returned when the global
address is used.
Important
14-8
Command character string
Example: *SVON [CR]
*ST [CR]
*PUN [CR]
When global commands are used, improve the communications reliability by reading the status
when appropriate.
Response (Host controller ← INDEXER Module)
Delimiter
No response returned.