YASKAWA E-7S SERVOPACK SGD7S Product Manual page 597

16.2 List of Parameters
16.2.2 List of Parameters
Parameter
No.
Pn008
Pn009
16-8
Name
Application Function
2
Selections 8
Low Battery Voltage Alarm/Warning Selection

n. X 0 Output alarm (A.830) for low battery voltage.
1 Output warning (A.930) for low battery voltage.
Function Selection for Undervoltage
0 Do not detect undervoltage.
 
n. X
1 Detect undervoltage warning and limit torque at host controller.
Detect undervoltage warning and limit torque with Pn424 and
2
Pn425 (i.e., only in SERVOPACK).
Warning Detection Selection
 
n. X 0 Detect warnings.
1 Do not detect warnings except for A.971.

n.X Reserved parameter (Do not change.)
Application Function
2
Selections 9

n. X Reserved parameter (Do not change.)
Current Control Mode Selection
• SERVOPACK Models SGD7S-R70A, -R90A, -1R6A, -2R8A,
-3R8A, -5R5A, and -7R6A: Use current control mode 1.
 
n. X 1
• SERVOPACK Models SGD7S-120A, -180A, -200A, -330A,
-470A, -550A, -590A, and -780A: Use current control mode 2.
2 Use current control mode 2.
Speed Detection Method Selection
 
n. X 0 Use speed detection 1.
1 Use speed detection 2.

n.X Reserved parameter (Do not change.)
Setting Setting Default
Range Unit Setting
0000h to
–
4000h
7121h
0000h to
–
0010h
0121h
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
Rotary Setup
restart
Reference
page 15-2
Reference
page 6-12
Reference
page 15-
After
All Tuning
restart
Reference
page 8-70
Reference
page 8-71
Continued on next page.
Refer-
ence
–
53
–