Authentication - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.9 "Security" menu
● Remote End
Select the required remote station. Only partners can be configured that have been
configured on the "Remote End" WBM page.
● Local Subnet
Enter the local subnet. Use the CIDR notation. The local network can also be a single PC
or another subset of the local network.
Multiple subnets can be used only with IKEv2. The enter the subnets separated by a comma.
● Request Virtual IP
When enabled, a virtual IP address is requested from the remote station during connection
establishment.
● Timeout [min]
Specify the period of time in minutes. If no data exchange takes place, when this time has
elapsed the VPN tunnel is automatically terminated.
4.9.6.4

Authentication

On this WBM page, you specify how the VPN connection partners authenticate themselves
with each other.
286
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08