Other Approvals; Emc And Environmental Type Tests - Siemens RUGGEDCOM RSG2300P Installation Manual

Chapter 6
Certification
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
view/109738831.
Section 6.1.9

Other Approvals

This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General Requirements
Section 6.2

EMC and Environmental Type Tests

The RUGGEDCOM RSG2300P has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
EMC Type Tests per IEC 61850-3
Test
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
40
Description
ESD
Radiated RFI
Burst (Fast Transient)
Surge
Induced (Conducted) RFI
https://support.industry.siemens.com/cs/ww/en/
Enclosure Contact
Enclosure Air
Enclosure Ports
Signal Ports
DC Power Ports
AC Power Ports
a
Earth Ground Ports
Signal Ports ±4 kV Line-to-Ground,
±2 kV Line-to-Line
DC Power Ports ±2 kV Line-to-Ground,
±1 kV Line-to-Line
AC Power Ports ±4 kV Line-to-Ground,
±2 kV Line-to-Line
Signal Ports
DC Power Ports
Test Levels Severity Levels
±8 kV
±15 kV
20 V/m
±4 kV @ 2.5 kHz
±4 kV
10 V
RUGGEDCOM RSG2300P
Installation Guide
4
4
4
3
4
3
Other Approvals