Selecting The Language For The User Interface; Navigating In The Web Browser Interface; Making Configuration Changes - Siemens Gigaset Owner's Manual

Selecting the Language for the User Interface

1. If you want to display the user interface in German, French, Italian or Spanish, click
on the flag of the desired country on the first page.
A new window is displayed where you can select the language.
2. Insert the installation CD into your CD ROM drive.
3. Click Browse and select your language file.
4. Then click Refresh and in the following window click OK, to confirm your selection.
5. Refresh the web page. The user interface will now be displayed in the desired lan-
guage.

Navigating in the Web Browser Interface

The Gigaset Router's management interface features a Basic Setup and an Advanced
Setup section. Use Basic Setup if you want to quickly set up the Gigaset Router for use
with a cable modem or DSL modem.
Advanced Setup supports more advanced functions like hacker attack detection, IP and
MAC address filtering, intrusion detection, virtual server setup, virtual DMZ hosts, as
well as other advanced functions.

Making Configuration Changes

Configurable parameters have a dialog box or a drop-down list. Once a configuration
change has been made on a page, be sure to click the APPLY or NEXT button at the
bottom of the page to enable the new setting.
To ensure proper screen refresh after a command entry, make sure that
Internet Explorer 5.0 is configured as follows: Under the menu Tools -
i
Internet Options - General - Temporary Internet Files - Settings, the
setting for Check for newer versions of stored pages should be Every
visit to the page.
Configuring the Gigaset Router
15