Configuring And Using The Ruggedcom Ape1808; Logging In To Ruggedcom Ape1808; Adding A User (Linux Only) - Siemens SIMATIC NET RUGGEDCOM APE1808 Configuration Manual

Configuring and Using the RUGGEDCOM APE1808

The following sections describe how to configure and use the RUGGEDCOM
APE1808:
NOTICE
Before using the RUGGEDCOM APE1808, create a backup image that can be restored
should the module be configured improperly.
Warranty does not support modules rendered inoperable/inaccessible due to config-
uration errors made by the user.
2.1

Logging in to RUGGEDCOM APE1808

Use the following default username and password to log in to the RUGGEDCOM
APE1808:
NOTICE
Security hazard – risk of unauthorized access
To prevent unauthorized access to the device, make sure to change the default pass-
word before commissioning the device.
Windows® 10 Enterprise 2019
LTSC
Linux
2.2

Adding a User (Linux Only)

To add a new user, type:
adduser
Where:
•
NOTICE
Use strong passwords. Avoid weak passwords such as password1, 123456789,
abcdefgh, etc.
RUGGEDCOM APE1808
Configuration Manual, 11/2019, C79000-G8976-1415-03
Software Platform
{ name }
{ name } is the name of the user
Default Username
There is no default username or password for Windows® 10 Enter-
prise 2019 LTSC installations. The username and password is set by
the user during the first boot.
root
Default Password
admin
2
11