Safety Warnings Summary - Juniper PTX10001-36MR Quick Start Manual

Fixed packet transport router

Hide thumbs Also See for PTX10001-36MR:

Table of Contents

5. Add a password to the root administration user account.

[edit]

root@# set system root-authentication plain-text-password

New password: password

Retype new password: password

6. (Optional) Configure the name of the PTX10001-36MR. If the name includes spaces, enclose the name in quotation

marks (" ").

[edit]

root@# set system host-name host-name

7. Configure the default gateway.

[edit]

root@# set routing-options static route 0.0.0.0/0 next-hop address

8. Configure the IP address and prefix length for the management interface.

[edit]

root@# set interfaces re0:mgmt-0 unit 0 family inet address address/prefix-length

9. (Optional) Configure more specific static routes to remote prefixes with access to the management port, if you prefer

that these prefixes not use the default route.

[edit]

root@# set routing-options static route remote-prefix next-hop destination-ip retain no-readvertise

10. Enable the SSH service.

[edit]

root@# set system services ssh root-login allow

11. Commit the configuration to activate it on the device.

[edit]

root@# commit

Safety Warnings Summary

This is a summary of safety warnings. For a complete list of warnings, including translations, see the PTX10001-36MR

Packet Transport Router Hardware Guide.

Table of Contents