Port Speed
Duplex Mode
Maximum Distance
Power over Ethernet
Maximum Power Budget
PoE Mode
Connector
Duplex Mode
The twisted pair ports can operate in either half- or full-duplex mode at
10 Mbps or 100 Mbps and full-duplex only at higher speeds.
The duplex mode of a port operating at 10 Mbps or 100Mbps, like port
speed, can be set manually using the management software or
automatically with Auto-Negotiation (IEEE 802.3u), the default setting.
The speed and duplex mode settings of a port can be set independently of
each other. For example in the case of a 10Mbps or 100Mbps port, it can
be configured such that its speed is set manually while its duplex mode is
established through Auto-Negotiation.
Table 7. GS980MX/52PSm Switch Twisted Pair Port Specifications
Specification
GS980MX Series Installation Guide for Virtual Chassis Stacking
Description
Ports 1-40: 10Mbps, 100Mbps or 1Gbps.
Ports 41-48: 100Mbps or 1/2.5/5Gbps.
Ports 1-40: You can set port speed
manually or with Auto-Negotiation at
10 Mbps or 100 Mbps.
Ports 41-48: The ports speed is set with
Auto-Negotiation only at 1Gbps and
higher.
The default is Auto-Negotiation for all
ports.
Ports 1-40: Full- or half-duplex mode at
10 Mbps or 100Mbps. Full-duplex only at
1 Gbps. Supports Auto-Negotiation at
100 Mbps.
Ports 41-48: Full-duplex only at all speeds.
100 meters (328 feet).
PoE (15.4 watts maximum per port) and
PoE+ (30 watts maximum per port).
370W.
Classes 0 to 4: Mode A.
8-pin RJ-45.
33