Figure 8-5 Networking Diagram Of Configuring The Interconnection Of Ftp Servers And Devices In And Out Of The - Huawei Quidway S9300 Configuration Manual - Network Management

8 HGMP Configuration
Figure 8-5 Networking diagram of configuring the interconnection of FTP servers and devices
in and out of the HGMP cluster (in non-NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
8-54
NOTE
In this configuration example where the Non-NAT mode is adopted, Member-3 accesses the FTP server
(2.0.0.1/8) out of the cluster and devices out of the cluster access the FTP server (Member-2) in the cluster.
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in the section
Cluster.
Disable FTP NAT on the administrator switch (The function is disabled by default.)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Network Management
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Example for Configuring Basic HGMP Functions for a
Quidway S9300 Terabit Routing Switch
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
Issue 03 (2010-09-20)