Configuring The Snmp Version; Creating A Mib View; Configuring Authorities For The Snmp User Group - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration

1.13.2 Configuring the SNMP Version

After the SNMP version is disabled on the device, to enable the NMS to access the device through
SNMPv3, you need to configure SNMPv3 on the switch.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent sys-info version v3
The SNMP version is configured.
By default, SNMPv3 is configured.
----End

1.13.3 Creating a MIB View

By configuring different MIB views, you can configure different access authorities for NM
Stations.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent mib-view { excluded | included } view-name oid-tree
A MIB view is created.
----End

1.13.4 Configuring Authorities for the SNMP User Group

Context
Do as follows on the switch enabled with the SNMP agent.
1-42 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)