Ping And Tracert - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch

Hide thumbs Also See for Quidway S9300:

Table of Contents

Quidway S9300 Terabit Routing Switch

Configuration Guide - Network Management

About This Chapter

This chapter describes basic concepts and applications of the ping and tracert commands.

The ping command is used to check network connectivity and host reachability. The word "ping"

is derived from the sonar operation, indicating a pulse of sound.

Tracert, also called Trace Route, is used to check the IP addresses and the number of gateways

between the source and the destination. Tracert is helpful in testing network reachability and

locating the fault on the network.

5.3 Performing Ping and Tracert Operations

This section describes the execution of the ping and tracert commands.

5.4 Debugging Ping and Tracert

This section describes how to locate faults through ICMP messages.

5.5 Configuration Examples

This section provides a configuration example of ping and tracert operations.

Issue 03 (2010-09-20)

Huawei Proprietary and Confidential

Ping and Tracert

5 Ping and Tracert