Huawei Quidway S9300 Configuration Manual - Network Management page 370

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

6 NQA Configuration
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure reachable routes between Switch A and the DNS server, between Switch A and the
host to be accessed, and between the DNS server and the host to be accessed. The configuration
details are not mentioned here.
Step 2 Create an NQA DNS test.
<Quidway> system-view
[Quidway] dns server 10.3.1.1
[Quidway] nqa test-instanc admin dns
[Quidway-nqa-admin-dns] test-type dns
[Quidway-nqa-admin-dns] dns-server ipv4 10.3.1.1
[Quidway-nqa-admin-dns] destination-address url server.com
Step 3 Perform the test.
[Quidway-nqa-admin-dns] start now
Step 4 Verify the test result.
[Quidway] display nqa results test-instance admin dns
NQA entry(admin, dns) :testflag is inactive ,testtype is dns
1 . Test 1 result
10.3.1.1
----End
Configuration Files
Configuration file of Switch
#
sysname Quidway
#
dns server 10.3.1.1
6-150
Configure the Switch as the NQA client.
Create and perform the DNS test on the Switch to check whether a connection between the
Switch and the DNS server can be set up and to check the speed of responding to an address
resolution request.
IP address of the DNS server
Name of the host to be accessed
The test is finished
Send operation times: 1
Completion:failed
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:
Min/Max/Average Completion Time: 1/1/1
Sum/Square-Sum
Completion Time: 1/1
Last Good Probe Time: 2009-2-3 10:52:5.7
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Receive response times: 1
RTD OverThresholds number: 0
Drop operation number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Issue 03 (2010-09-20)

Advertisement

Table of Contents
loading

Table of Contents