Figure 8-7 Networking Diagram Of Configuring Devices In The Hgmp Cluster To Access The Outside Snmp Host - Huawei Quidway S9300 Configuration Manual - Network Management

8 HGMP Configuration
Figure 8-7 Networking diagram of configuring devices in the HGMP cluster to access the
outside SNMP host (in non-NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
8-74
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in Example for Configuring Basic HGMP Functions for a
Disable SNMP NAT on the administrator switch (The function is enabled by default.)
NOTE
Related configurations of cluster NAT must be performed on the administrator switch.
Configure routes on the administrator switch and member switches respectively to ensure
that reachable routes exist between SNMP host and member switches.
Assign an IP address to the SNMP host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Network Management
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Quidway S9300 Terabit Routing Switch
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
Issue 03 (2010-09-20)
Cluster.