Example For Configuring A Threshold For The Nqa Alarm - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
l

6.37.29 Example for Configuring a Threshold for the NQA Alarm

This part provides examples for configuring the actions that the system needs to perform in
response to the threshold exceeding, such as generating logs, generating traps, or generating logs
and traps.
Networking Requirements
As shown in
monitor the packet loss ratio of the test result. If the ratio exceeds the threshold, an alarm is sent
to the NM station.
Issue 03 (2010-09-20)
nqa-ftp-record ip-address 11.1.1.8
nqa-ftp-record username ftp
nqa-ftp-record password ftp
nqa-ftp-record filename icmp
nqa-ftp-record item-num 10010
nqa-ftp-record time 2
nqa test-instance admin icmp
test-type icmp
destination-address ipv4 11.1.1.10
frequency 5
#
snmp-agent
snmp-agent local-engineid 000007DB7F000001000021D7
snmp-agent community read
snmp-agent community write
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 11.1.1.8 params securityname
wan
snmp-agent trap enable feature-name nqa trap-name nqaftpsaverecordnotification
#
user-interface con 0
user-interface vty 0 4
user-interface vty 16 20
#
return
Configuration file of Switch B
#
sysname SwitchB
vlan batch 10
#
interface Vlanif10
ip address 11.1.1.10 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
return
Figure 6-31, Switch A serves as the client to perform the ICMP jitter test and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
public
private
6 NQA Configuration
6-235