Figure 8-3 Networking Diagram Of Configuring Basic Hgmp Functions For A Cluster - Huawei Quidway S9300 Configuration Manual - Network Management

8 HGMP Configuration

Figure 8-3 Networking diagram of configuring basic HGMP functions for a cluster

SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
8-34
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC address
0001-0001-0001
0003-0003-0003
Create a management VLAN on all devices. Enable NDP and NTDP to ensure that each
device can detect the topology structure of the network through NTDP.
Choose the administrator switch, and then create a cluster named HUAWEI on the
administrator switch.
Add all the devices that support HGMP in the Layer 2 network to the cluster.
Assign an IP address to VLANIF 10 to facilitate the communication between member
switches in the cluster and devices out of the cluster.
Configure public servers and hosts for the cluster.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Network Management
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Quidway S9300 Terabit Routing Switch
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
Issue 03 (2010-09-20)