Huawei Quidway S9300 Configuration Manual - Network Management page 334

6 NQA Configuration
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
6-114
description string
The description is configured for the NQA test instance.
destination-address ipv4 ip-address
The destination IP address is set for the NQA test instance.
NOTE
This parameter cannot be configured for DNS test instances. In the case that the lable-type of PWE3
Ping or PWE3 Trace is normal or lable-alert, This parameter can be configured for PWE3 Ping and
PWE3 Trace.
destination-address url urlstring
The destination URL address is set for the NQA test instance.
NOTE
The destination URL address can be configured for DNS and HTTP test instances.
destination-port port-number
The destination port number is set for the NQA test instance.
NOTE
The destination port number can be configured only for UDP, Jitter, TCP, Trace, FTP, and HTTP test
instances.
dns-server ipv4 ip-address
The DNS server address is configured for the NQA test instance.
NOTE
The DNS server address can be configured only for DNS and HTTP test instances.
fail-percent percent
The failure percentage is set for the NQA test instance.
NOTE
This parameter cannot be configured for Trace, FTP, DNS, LSP Trace, PWE3 Trace, and MTrace test
instances.
frequency interval
The test period is set for the NQA test instance.
ftp-filename file-name
The file name and file path are configured for the FTP test instance.
NOTE
The file name and file path can be configured only for the FTP test instance.
ftp-filesize size
The size of the file is set for the FTP test instance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)