Configuring Basic Functions Of Snmpv3 - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration
Run the display snmp-agent community command. If information on the community name is
displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent community
Run the display snmp-agent sys-info version command. If the version of SNMP run on the
agent is displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent sys-info version
SNMP version running in the system:

1.9 Configuring Basic Functions of SNMPv3

This section describes how the NM Station accesses the device through SNMPv3.
1.9.1 Establishing the Configuration Task
Before configuring SNMPv3, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
1.9.2 Configuring Basic SNMP Functions
By default, SNMP is disabled. You can do as follows to enable SNMPv3.
1.9.3 Configuring the SNMP Version
By default, the NM Station communicates with the switch through SNMPv3.
1.9.4 Configuring an SNMP User Group
This part describes how to create an SNMP access user group.
1.9.5 Configuring User Information
After user information about the NM Station is configured, you can configure NM Station users
in a specific group to access the device.
1.9.6 Checking the Configuration
After basic functions of SNMPv3 are configured, you can view configurations of SNMPv3.
1-24
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
Community name:public
Group name:public
Storage-type: nonvolatile
Community name:private
Group name:private
Storage-type: nonvolatile
SNMPv2c SNMPv3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)