Optional) Deleting Or Quitting A Cluster - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
l
----End

8.2.6 (Optional) Deleting or Quitting a Cluster

Context
If you do not need to use a cluster to manage a switch, you can delete the switch or configure
the switch to quit the cluster.
Procedure
l
Issue 03 (2010-09-20)
2. Run:
cluster
The cluster view is displayed.
3. Run:
add-member [ member-number ] mac-address mac-address [ password password]
A member switch is added.
Adding a member switch automatically
In this mode, the administrator switch prompts you whether to add all the existing candidate
switches to the cluster. If the authentication mode is used to add member switches, the
administrator switch quits the action of adding a member switch.
Do as follows only on the administrator switch:
1. Run:
system-view
The system view is displayed.
2. Run:
cluster
The cluster view is displayed.
3. Run:
auto-build [ recover ]
A member switch is added automatically.
The auto-build command can also be used to create a cluster automatically. For
configuration details, see
recover indicates that all member switches, including the member switches missing
on the administrator switch should re-join the HGMP cluster.
NOTE
If the administrator switch of HGMP cluster A considers that switch N does not belong to
cluster A but switch N considers that it belongs to cluster A, switch N is called the missing
member switch on the administrator switch.
Deleting a cluster
Do as follows on the administrator switch:
1. Run:
system-view
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Creating a Cluster.
8 HGMP Configuration
8-15