Debugging Nqa; Configuration Examples - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Run the system-view command, enter the system view.
Step 2 Run the nqa test-instance admin-name test-name command, enter the NQA test instance view.
Step 3 Run the clear-records command in the NQA view to clear history statistics on NQA tests and
test results.
----End

6.36.3 Debugging NQA

This part describes how to debug test instances.
Prerequisite
When a fault occurs, run the following debugging command in the user view to debug NQA
and locate the fault.
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
Procedure
Step 1 Run the debugging nqa all command in the NQA view to enable NQA debugging.
----End

6.37 Configuration Examples

This section provides several configuration examples of NQA.
6.37.1 Example for Configuring the ICMP Test
6.37.2 Example for Configuring the FTP Download Test
6.37.3 Example for Configuring the FTP Upload Test
6.37.4 Example for Configuring the HTTP Test
6.37.5 Example for Configuring the DNS Test
6.37.6 Example for Configuring the Traceroute Test
6.37.7 Example for Configuring the SNMP Query Test
6.37.8 Example for Configuring the TCP Test
6.37.9 Example for Configuring the UDP Test
Issue 03 (2010-09-20)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
6-139