Quidway NetEngine80
Configuration Guide - Basic Configurations
accounting-scheme default
#
domain default
#
Return
8.8.2 Example for Configuring FTP ACL
Networking Requirements
As shown in
At the client side, PC1, PC2 and the FTP server are reachable. After configuring ACL, the
router that serves as the FTP server allows only PC1 with the host address of 172.16.104.111
to download and upload files in the FTP mode. PC2 cannot be connected to the FTP server.
Figure 8-2 Networking diagram of configuring FTP ACL
172.16.104.110
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
Configuration Procedure
Step 1 Configure the basic FTP functions.
See
Step 2 Configure the basic ACL.
<Quidway> system-view
[Quidway] acl number 2001
[Quidway-acl-basic-2001]rule permit source 172.16.104.111 0.0.0.255
[Quidway-acl-basic-2001]quit
Issue 04 (2009-12-20)
Figure
8-2, the IP address of the FTP server is 172.16.104.110/24.
IP Network
Server
Configure the basic FTP functions.
Configure ACL on the FTP server.
ACL number
"Configuring the Router to be the FTP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE2/0/0
PC2
172.16.105.111/24
GE1/0/0
PC1
172.16.104.111/24
Server".
8 FTP, TFTP and XModem
8-21