Checking The Configuration; Configuring The Udp Test; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

6 NQA Configuration
<Quidway> display nqa-server
NQA Server Max: 5000
NQA Concurrent TCP Server : 1
nqa-server tcpconnect 10.112.58.3 2000 ACTIVE

6.13 Configuring the UDP Test

This section describes how to configure a User Datagram Protocol (UDP) test to check the
responding speed of a UDP port.

6.13.1 Establishing the Configuration Task

Before configuring a UDP test, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
6.13.2 Configuring the UDP Server
The IP address and number of the port monitored by the server must be identical with those
configured on the client.
6.13.3 Configuring the UDP Client
This part describes how to set UDP test parameters.

6.13.4 Checking the Configuration

After configuring the UDP test, you can view the test result.
6.13.1 Establishing the Configuration Task
Before configuring a UDP test, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
To obtain the time for the specified port to respond to a UDP connection request, you can create
a UDP test instance.
Pre-configuration Tasks
Before configuring the UDP test, configure reachable routes between the NQA client and the
UDP server.
Data Preparation
To configure the UDP test, you need the following data.
No.
1
2
3
6-34
Data
Administrator name and test name
IP address and port of the UDP server
Destination IP addresss and the port of the probe packets sent by the UDP client
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
NQA Server Num: 1
NQA Concurrent UDP Server: 0
Issue 03 (2010-09-20)

Advertisement

Table of Contents
loading

Table of Contents