6 NQA Configuration
6.34.5 (Optional) Configuring the Duration of Saving Test Results
Through FTP
Each time, the system can send two test results to the FTP server. If the FTP server cannot
continue to write the file after being interrupted, a new file is created on the FTP server for the
test results sent each time.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record time time
The duration of saving test results to the FTP server through FTP is configured.
----End
6.34.6 (Optional) Enabling Alarms to Be Sent to the NM Station
After the FTP Transmission Succeeds
After test results are successfully saved on the FTP server, a trap message is sent to the NMS
for notification.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record trap-enable
Alarms are configured to be sent to the NM station after the FTP transmission succeeds.
----End
6.34.7 Starting the Test Instance
After you start a test instance, test results are field periodically.
6-132
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)