Figure 6-20 Networking Diagram Of Mtrace - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch

Hide thumbs Also See for Quidway S9300:

Table of Contents

6 NQA Configuration

You need to enable MTrace on Switch B to check the RPF path from the multicast source to the

current Switch.

The NQA MTrace test is used to implement the MTrace function.

Figure 6-20 Networking diagram of MTrace

Configuration Roadmap

The configuration roadmap is as follows:

Data Preparation

To complete the configuration, you need the following data:

Configure Switch B as the NQA client and create an MTrace test on it.

Perform the test and view the test result.

Test instance name: admin mtrace

IP address of the multicast source: 11.1.0.2/24

This example covers only the configurations of the MTrace test.

Huawei Proprietary and Confidential

Quidway S9300 Terabit Routing Switch

Configuration Guide - Network Management

Issue 03 (2010-09-20)