Maintaining Rmon And Rmon2 - Huawei Quidway S9300 Configuration Manual - Network Management
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages) ,
- Hardware description (224 pages)
Table of Contents
Advertisement
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Example
Run the display rmon2 protocoldirtable command. If information about the protocol directory
table is displayed, it means that the configuration succeeds.
<Quidway> display rmon2 protocoldirtable
protocol directory table last change time : 0days 06h:48m:34s(2451478)
protocolDirId
protocolDirParameters
protocolDirLocalIndex
protocolDirDescr
protocolDirAddressMapConfig:
protocolDirHostConfig
protocolDirMatrixConfig
protocolDirOwner
protocolDirStatus
Run the display rmon2 hlhostcontroltable command. If information about the host control
table is displayed, it means that the configuration succeeds.
<Quidway> display rmon2 hlhostcontroltable
Abbreviation:
index - hlhostcontrolindex
datasource - hlhostcontroldatasource
droppedfrm - hlhostcontrolnldroppedframes
inserts - hlhostcontrolnlinserts
Deletes - hlHostControlNlDeletes
maxentries - hlhostcontrolnlmaxdesiredentries
owner - hlhostcontrolowner
status - hlhostcontrolstatus
index datasource
123
Run the display rmon2 nlhosttable command. If information about the host table is displayed,
it means that the configuration succeeds.
<Quidway> display rmon2 nlhosttable hostcontrolindex 123 timemark 1000 hostaddress
10.110.99.2
Abbreviation:
HIdx - hlHostControlIndex
PIdx - ProtocolDirLocalIndex
Addr - nlHostAddress
InPkts - nlHostInPkts
OutPkts - nlHostOutPkts
InOctes - nlHostInOctets
OutOctes - nlHostOutOctets
OutMac - nlHostOutMacNonUnicastPkts
ChgTm - nlHostTimeMark
CrtTm - nlHostCreateTime
HIdx
123
2.5 Maintaining RMON and RMON2
When an RMON operation fault occurs, you can run the debuggingcommand in the user view
to locate the fault and analyze its cause.
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
Issue 03 (2010-09-20)
droppedfrm inserts
GigabitEthernet2/2/0
PIdx
Addr
InPkts
1
10.110.99.2
0
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:
8.0.0.0.1.0.0.8.0
:
2.0.0
:
1
:
aaa
notsupported
:
supportedon
:
notsupported
:
:
active
Deletes
0
19
0
OutPkts
InOctes
78
0
2 RMON and RMON2 Configuration
maxentries owner
status
100
China
active
OutOctes
OutMac
ChgTm
10046
78
81489
CrtTm
40859
2-15
Advertisement
Table of Contents
