Checking The Configuration - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Step 8 Run:
quit
Return to the system view.
Step 9 Run:
nqa test-instance admin-name test-name
The view of the created test group is displayed.
Step 10 (Optional) Run:
group-testperiod period
The test period of the test group is configured.
By default, the test period is 60 seconds.
During the specified interval for the group test, if there are too many members in the test group,
the group test cannot be started normally. Therefore, you should select a proper interval for the
group test according to the number of the group members.
Step 11 Run:
start
The NQA test is started.
Select the start mode as required because the start command has several forms.
l To perform the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ]
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.29.3 Checking the Configuration

After configuring an NQA test group, you can view the result of each type of test in the group.
Prerequisite
The configurations of the NQA Test Group function are complete.
Context
Issue 03 (2010-09-20)
hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ]
command.
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
6-111

Advertisement

Table of Contents
loading

Table of Contents