Clearing The Ndp Statistics; Monitoring The Operation Status Of The Hgmp Cluster - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
This part describes how to use the reset ndp statistics command to clear the statistics on NDP.

8.4.2 Monitoring the Operation Status of the HGMP Cluster

This part describes how to use the display commands to monitor the operating status of the
HGMP cluster.
8.4.3 Debugging HGMP
When a fault occurs on NDP, NTDP, or a cluster, you can run the debugging command in the
user view to debug NDP, NTDP, or the cluster, view debugging information, locate the fault,
and analyze the cause.

8.4.1 Clearing the NDP Statistics

This part describes how to use the reset ndp statistics command to clear the statistics on NDP.
Context
Once statistics are cleared, they cannot be restored. Confirm the action before you use the
command.
Procedure
Step 1 Run the reset ndp statistics [ interface { interface-type interface-number [ to interface-type
interface-number ] } &<1-10> ] command in the user view to clear the NDP statistics.
----End
8.4.2 Monitoring the Operation Status of the HGMP Cluster
This part describes how to use the display commands to monitor the operating status of the
HGMP cluster.
Context
In routine maintenance, you can run the following commands in any view to display the operation
stauts of HGMP.
Procedure
l
l
l
l
l
Issue 03 (2010-09-20)
CAUTION
Run the display ndp to check the NDP configuration in the system view.
Run the display ntdp to check the global NTDP configuration.
Run the display cluster to check information about the HGMP cluster to which the device
belongs.
Run the display ntdp device-list [ verbose ] to check information about the HGMP cluster
to which the device belongs.
Run the display cluster-topology-info to check the cluster topology information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 HGMP Configuration
8-31