Configuring Universal Nqa Test Parameters; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

6 NQA Configuration
Procedure
l
l
----End
Example
Using the display nqa results command, you can view the results of only the member tests but
cannot view the result of the NQA test group.
After a test group is created, run the display nqa-agent command. Based on the "nqa status"
field in the command output, you can view to which test group the member tests belong.
<Quidway> display nqa-agent
nqa test-instance group icmp
test-type icmp
switch-to group
nqa status : group leader, group members number : 2
nqa test-instance admin test1
test-type icmp
destination-address ipv4 10.1.1.2
join group nqa group icmp
nqa status : group member, belong to group : group icmp
nqa test-instance admin test2
test-type icmp
destination-address ipv4 10.2.1.2
join group nqa group icmp
nqa status : group member, belong to group : group icmp

6.30 Configuring Universal NQA Test Parameters

This section describes how to set and use universal parameters for NQA test instances.

6.30.1 Establishing the Configuration Task

Before setting universal parameters for NQA test instances, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
6.30.2 Configuring Universal Parameters for the NQA Test Instance
This part describes the application of each parameter in the NQA test instance.
6.30.3 Checking the Configuration
After setting universal parameters for NQA test instances, you can view the test result.
6.30.1 Establishing the Configuration Task
Before setting universal parameters for NQA test instances, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
Applicable Environment
NQA supports not only the configuration of the parameters for various types of tests, but also
the configuration of universal options of a test group.
6-112
Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
Run the display nqa-agent [ admin-name test-name ] [ verbose ] to view the status of the
test instance configured on the NQA client.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)