Huawei Quidway S9300 Configuration Manual - Network Management page 335

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
Issue 03 (2010-09-20)
NOTE
The size of the file can be configured only for the FTP test instance.
ftp-operation { get | put }
The operation type is configured for the FTP test instance.
NOTE
The operation type can be configured only for the FTP test instance.
ftp-password password
The user password is set for the FTP test instance.
NOTE
The user password can be configured only for the FTP test instance.
ftp-username name
The user name is set for the FTP test instance.
NOTE
The user name can be configured only for the FTP test instance.
http-operation { get | post }
The test type is set for the HTTP test instance.
NOTE
The operation type can be configured only for the HTTP test instance.
http-url deststring [ verstring ]
The relative file path and version are configured for the HTTP test instance.
NOTE
The relative file path and version can be configured only for the HTTP test instance.
interval { milliseconds
The interval for sending packets is set for the NQA test instance.
NOTE
The interval for sending packets can be configured only for the ICMP, UDP, SNMP, Jitter, ICMP Jitter,
Path Jitter, LSP Jitter, TCP, LSP Ping, PWE3 Ping test instances.
jitter-packetnum number
The number of test packets is set for the NQA test instance.
NOTE
The number of test packets can be configured only for all jitter type test instances ( Except PathJitter ).
local-pw-id local-pw-id
The PW ID or VC ID is set for the local device.
NOTE
This parameter can be configured for the PWE3 Ping and PWE3 Trace test instances.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
interval | seconds interval }
6 NQA Configuration
6-115