Configuring Advanced Hgmp Functions - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Cluster name:"HUAWEI"
Role:Administrator switch
management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.1.1.1/24
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 2 member(s) in the cluster, and 0 of them are down.
If the cluster is established successfully, you can run the display cluster candidates command
to view information about candidate switches, such as the MAC address and device type.
<HUAWEI_0.Quidway> display cluster candidates
MAC
0004-0004-0004
0003-0003-0003
0002-0002-0002
If the cluster is established successfully, you can run the display cluster members command
to view information about member switches, such as the MAC address and device type. Member
switches are in the Up state.
<HUAWEI_0.Quidway> display cluster members
The list of cluster member:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
0
1
2

8.3 Configuring Advanced HGMP Functions

This section describes how to configure advanced HGMP functions to simplify the management
and maintenance of a basic cluster.
8.3.1 Establishing the Configuration Task
Before configuring advanced HGMP functions, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
8.3.2 Adjusting Parameters of the Cluster
To better manage switches in a cluster, you can adjust HGMP parameters as required. Adjustable
parameters include the interval for sending Handshake packets, holdtime of the configuration,
whether to enable candidate switches to automatically join a cluster, aging time of member
switches, multicast address of the cluster, mode of adding management interfaces of the cluster
to a VLAN, and public server and host of the cluster.
8.3.3 Managing Switches in a Cluster Through HGMP
Issue 03 (2010-09-20)
: 10
: disabled
HOP IP
2
1
1
Device Type
S9300
S9300
S9300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S9300
S9300
S9300
MAC Address Status Device Name
00e0-fcb8-d6b6 Admin
0018-8267-7f7d Up
00e0-0003-0003 Up
8 HGMP Configuration
HUAWEI_0.Administrator-1
HUAWEI_1.Member-1
HUAWEI_2.Member-2
8-19