Huawei Quidway S9300 Configuration Manual - Network Management page 253

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
l To perform the NQA test after a certain delay period, run the start delay { seconds second
The differences between the TCP Public tests and the TCP Private tests are as follows:
l The TCP Public tests do not require the destination port to be configured on the client.
l The TCP Private tests require the destination port be specified and the related monitoring
----End
6.12.4 Checking the Configuration
After configuring the TCP test, you can view the test result.
Prerequisite
The configurations of the TCP Test function are complete.
Context
Procedure
l
l
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
<Quidway> display nqa results
NQA entry(admin, tcp) :testflag is inactive ,testtype is tcp
1 . Test 1 result
Run the display nqa-server command,the status of the NQA server is displayed.
Issue 03 (2010-09-20)
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
Connection requests are initiated and sent to the TCP port 7 of the destination address. The
server should monitor the TCP port 7.
services enabled on the server.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
Run the display nqa-server command to view the information about the NQA server.
The test is finished
Send operation times: 3
Completion:success
Attempts number:0
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:10.2.1.2
Min/Max/Average Completion Time: 31/62/51
Sum/Square-Sum Completion Time: 155/8649
Last Good Probe Time: 2006-8-5 15:55:15.3
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
6-33