Example For Configuring The Batch Restart Function For An Hgmp Cluster; Figure 8-9 Networking Diagram Of Configuring The Batch Restart Function For An Hgmp Cluster - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8.5.7 Example for Configuring the Batch Restart Function for an
HGMP Cluster
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member switches Member-2 and Member-3 are required to be restarted.

Figure 8-9 Networking diagram of configuring the batch restart function for an HGMP cluster

SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
Issue 03 (2010-09-20)
Figure 8-9, all the Layer 2 switches belong to the same cluster. Administrator-1 is
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
Administrator-1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NM station
3.0.0.1/8
IP/MPLS
core
Log station
4.0.0.1/8
GE1/0/3
GE1/0/2
10.0.0.1/8
......
Member-2
Cluster
Device
Member-1
Member-3
8 HGMP Configuration
GE1/0/1
MAC Address
0002-0002-0002
0004-0004-0004
8-95