Restarting Nqa Test Instances; Clearing Nqa Statistics - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch

Hide thumbs Also See for Quidway S9300:

Table of Contents

6 NQA Configuration

If a test instance fails, you can try to restart the test instance in the next test period.

When the statistics on the current test instance are saved to the FTP server, you can clear test

results on the device.

6.36.3 Debugging NQA

This part describes how to debug test instances.

6.36.1 Restarting NQA Test Instances

If a test instance fails, you can try to restart the test instance in the next test period.

Prerequisite

To restart an NQA test instance, run the following command in the NQA instance view.

Restarting an NQA test instance interrupts the running of tests.

Step 1 Run the system-view command, enter the system view.

Step 2 Run the nqa test-instance admin-name test-name command, enter the NQA test instance view.

Step 3 Run the restart command in the NQA instance view to restart an NQA test instance.

6.36.2 Clearing NQA Statistics

When the statistics on the current test instance are saved to the FTP server, you can clear test

results on the device.

NQA statistics cannot be restored after you clear them. So, confirm the action before you use

the command.

Statistics about the test being performed cannot be cleared.

Huawei Proprietary and Confidential

Quidway S9300 Terabit Routing Switch

Configuration Guide - Network Management

Issue 03 (2010-09-20)