Checking The Configuration; Maintaining Netstream; Debugging Netstream - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
The type of the interface indexes contained in IPv4 exported packets is set.
By default, the interface indexes in the IPv4 NetStream exported packets contain 16 bits.
Step 3 Run:
ipv6 netstream export index-switch index-switch
The type of the interface indexes contained in IPv6 exported packets is set.
By default, the interface indexes in the IPv6 NetStream exported packets contain 16 bits.
----End

7.7.3 Checking the Configuration

Prerequisite
The configurations of the mapping of NetStream interface indexes are complete.
Procedure
Step 1 Run the display netstream global command to check the configuration of the current interface
index.
----End
Example
Check the configuration of the NetStream interface indexes.
[Quidway] display netstream global
ip netstream export version 9
ip netstream export index-switch 32
ipv6 netstream export index-switch 32
ip netstream aggregation as
enable
export version 9

7.8 Maintaining NetStream

This section describes how to clear NetStream statistics and debug NetStream.

7.8.1 Debugging NetStream

7.8.1 Debugging NetStream
Context
For more information about the debugging command, refer to the Debugging Reference.
Issue 03 (2010-09-20)
NOTE
Debugging affects the performance of the system. So, after debugging, run the undo debugging all
command to disable it immediately.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
7-21