Configuration File - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
[Quidway] snmp-agent trap enable
# Configure the source interface that sends alarm messages to the NMS.
[Quidway] snmp-agent trap source LoopBack 0
# Assign an IP address to the NMS that receives the alarm messages.
[Quidway] snmp-agent target-host trap address udp-domain 11.1.1.1 params
securityname public v2c private-netmanager
Step 4 Verify the configuration.
# Display the IP address assigned to the NMS that receives the alarm messages.
[Quidway] display snmp-agent target-host
Target-host NO. 1
-----------------------------------------------------------
IP-address
VPN instance
Security name : a
Port
Type
Version
Level
NMS type
-----------------------------------------------------------
----End

Configuration File

Configuration file of the switch
#
sysname Quidway
#
vlan batch 10
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
#
interface Vlanif10
ip address 11.1.1.2 255.255.255.0
#
interface
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
ip route-static 11.1.1.1 255.255.255.255 11.1.1.2
#
snmp-agent
snmp-agent local-engineid 800007DB03001882817A30FC
snmp-agent sys-info version v2c
snmp-agent target-host trap address udp-domain 11.1.1.1 params securityname public
v2c private-netmanager
snmp-agent trap enable
snmp-agent trap source LoopBack0
#
return
Issue 03 (2010-09-20)
: 11.1.1.2
: -
: 162
: trap
: v2c
: No authentication and privacy
: HW NMS
GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-91