Huawei Quidway S9300 Configuration Manual - Network Management page 454

6 NQA Configuration
Step 3 Configure the duration of saving test results through FTP.
[SwitchA] nqa-ftp-record time 2
Step 4 Send an alarm to the NM station after the FTP transmission succeeds.
[SwitchA] nqa-ftp-record trap-enable
Step 5 Enable the FTP server to save NQA test results through FTP on Router A.
<SwitchA> system-view
[SwitchA] nqa-ftp-record enable
Step 6 Start the test instance.
[SwitchA] nqa test-instance admin icmp
[SwitchA-admin-icmp] start now
Step 7 Verify the configuration.
# Display the NQA test results of each switch.
<SwitchA> display nqa-ftp-record configuration
---------------NQA FTP SAVE RECORD CONFIGURATION---------------
----End
Configuration Files
l
6-234
FUNCTION: ENABLE TRAP: ENABLE
IP-ADDRESS:11.1.1.8
VPN-INSTANCE:
USERNAME:ftp
PASSWORD:ftp
FILENAME:icmp
ITEM-NUM:10010
TIME:2
LAST FINISHED FILENAME:icmp20080605-150350.txt
Configuration file of Switch A
#
sysname SwitchA
vlan batch 10 20
#
interface Vlanif10
ip address 11.1.1.11 255.255.255.0
#
interface Vlanif20
ip address 11.1.2.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface NULL0
#
aaa
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
nqa-ftp-record enable
nqa-ftp-record trap-enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)