Checking The Configuration; Maintaining Ntp - Huawei Quidway S9300 Configuration Manual - Network Management

3 NTP Configuration
ntp-service multicast-server [ authentication-keyid key-id | version number ]*
The ID of the authentication key used by the NTP multicast server is configured.
For configuring the multicast client, see
----End

3.4.8 Checking the Configuration

After NTP security mechanisms are configured, you can view the configuration.
Prerequisite
The configurations of the NTP Security Mechanisms are complete.
Procedure
l
l
----End
Example
Run the display ntp-service status command to view the status of the NTP service.
<Quidway> display ntp-service status
clock status: synchronized
clock stratum: 2
reference clock ID: LOCAL(0)
nominal frequency: 60.0002 Hz
actual frequency: 60.0002 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 10.00 ms
reference time: 15:51:36.259 UTC Apr 25 2010(C6179088.426490A3)
Run the display ntp-service sessions [ verbose ] command to view the status of NTP sessions.
<Quidway> display ntp-service sessions
disper
********************************************************************************
15.6
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured,

3.5 Maintaining NTP

This section describes how to debug NTP through the debugging command in case of an NTP
operation fault.
3-20
Run the display ntp-service status command to view the status of the NTP service.
Run the display ntp-service sessions [ verbose ] command to view the status of NTP
sessions.
source
[12345]127.127.1.0
6 vpn-instance
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Configuring the Broadcast
reference stra reach poll
LOCAL(0) 7
Mode.
now offset delay
1 64 2 -
Issue 03 (2010-09-20)
0.0