Huawei Quidway S9300 Configuration Manual - Network Management page 415

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure an NQA MTrace test on Switch C.
<SwitchC> system-view
[SwitchC] nqa test-instance admin mtrace
[SwitchC-nqa-admin-mtrace] test-type mtrace
[SwitchC-nqa-admin-mtrace] mtrace-source-address ipv4 11.1.0.2
[SwitchC-nqa-admin-mtrace] destination-address ipv4 11.1.6.4
[SwitchC-nqa-admin-mtrace] mtrace-query-type last-hop
[SwitchC-nqa-admin-mtrace] mtrace-last-hop-address ipv4 11.1.6.2
Step 2 Perform the test.
[SwitchC-nqa-admin-mtrace] start now
Step 3 Verify the test result. You can find that the RPF path from the multicast source to Switch C is
Switch E-Switch D-Switch C.
[SwitchC-nqa-admin-mtrace] display nqa results test-instance admin mtrace
NQA entry(admin, mtrace) :testFlag is inactive ,testtype is mtrace
1 . Test 1 result
Issue 03 (2010-09-20)
Configure Switch C as the NQA client and create an MTrace test on it.
Perform the test and view the test result.
Test instance name: admin mtrace
IP address of the multicast source: 11.1.0.2/24
IP address of the destination host: 11.1.6.4
IP address of the Switch at the last hop: 11.1.6.2
The test is finished
Completions: success
Current Hop:3
SendProbe:1
Timeout Count:0
Drop Count:0
Responser:11.1.0.2
mtrace start time: 2009-2-7 17:36:18.1
Last Good Probe Time: 2009-2-7 17:36:18.1
Last Good Path Time: 2009-2-7 17:36:18.1
1 . Hop 1
Outgoing Interface Address: 11.1.6.2
Incoming Interface Address: 11.1.4.1
Prehop Router Address: 11.1.4.2
Protocol : PIM
Forward Ttl:1
SG Packet Count:0xffffffff
Input Packet Count:9424
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
2 . Hop 2
Outgoing Interface Address: 11.1.4.2
Incoming Interface Address: 11.1.2.1
Prehop Router Address: 11.1.2.2
Protocol : PIM
Forward Ttl:1
SG Packet Count:0xffffffff
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Query Mode: max-hop
Current Probe:1
ResponseProb:1
Busy Count:0
Max Path Ttl:4
Response Rtt: 62
Forward Code:NO_ERROR
Current Path Ttl:4
Hop Time Delay(ms):65
Output Packet Count:9815
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:NO_ERROR
Current Path Ttl:3
Hop Time Delay(ms):1
6 NQA Configuration
6-195