Creating An Nqa Mtrace Test; Configuring The Nqa Mtrace Test - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
No.
1
2
3
4

6.23.2 Creating an NQA MTrace Test

This part describes how to configure an MTrace instance before performing the MTrace test for
the RPF path from the multicast source to the destination host.
Context
Do as follows on the switch that functions as the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 3 Run:
test-type mtrace
The test type is set to MTrace.
Step 4 Run:
quit
Exit from the test instance view.
----End

6.23.3 Configuring the NQA MTrace Test

This part describes how to set parameters for the MTrace test for the RPF path from the multicast
source to the destination host.
Context
Do as follows on the switch with the MTrace test instance being created:
Issue 03 (2010-09-20)
Data
Name of the test instance
IP address of the multicast source
IP address of the destination host
(Optional)VPN instance
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
6-83