6 NQA Configuration
No.
1
2
3
4
6.29.2 Configuring an NQA Test Group
This part describes how to set parameters for the NQA test group.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 3 Run:
test-type { icmp | jitter | tcp | udp | snmp | lspping | lspjitter | icmpjitter |
pwe3ping }
The test type is set.
Step 4 Run:
switch-to group
The current test is switched to a test group.
Step 5 Run:
quit
Return to the system view.
Step 6 Run:
nqa test-instance admin-name test-name
The view of the existed NQA test is displayed.
Step 7 Run:
join group nqa admin-name test-name
The current NQA test is added to the created test group.
6-110
Data
Administrator name and name of the test group
Administrator names and test names of the test members
(Optional) Test period of the test group
Start mode and end mode of the test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)