Configuring The Ftp Upload Test; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

Terabit routing switch
Hide thumbs Also See for Quidway S9300:
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

6.7 Configuring the FTP Upload Test

This section describes how to configure an FTP upload test to check the FTP upload performance.

6.7.1 Establishing the Configuration Task

Before configuring an FTP upload test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
6.7.2 Configuring the FTP Upload Test Parameters
This part describes how to set parameters for the FTP upload test.
6.7.3 Checking the Configuration
After configuring the FTP upload test, you can view the test result.
6.7.1 Establishing the Configuration Task
Before configuring an FTP upload test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP upload test, the local device functions as an FTP client, intending to upload the
specified file to an FTP server.
The test result contains the statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
In an FTP upload test, you can specify the file to be uploaded or the bytes to be uploaded. If
certain bytes are specified, the FTP client then automatically generates the test files for
uploading.
Pre-configuration Tasks
Before configuring the FTP upload test, complete the following tasks:
l
l
Data Preparation
To configure the FTP upload test, you need the following data.
No.
1
2
Issue 03 (2010-09-20)
DataConnTime Min/Max/Average: 218/218/218
SumTime Min/Max/Average: 656/656/656
Average RTT:380
Lost packet ratio: 0 %
Configuring the FTP user name and password and the login directory
Configuring routes between the NQA client and the FTP server
Data
Administrator name and test name
IP address of the FTP server
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
6-15

Advertisement

Table of Contents
loading

Table of Contents