Enabling The Function Of Saving Nqa Test Results Through Ftp; Optional) Configuring The Number Of Test Results Saved Through Ftp - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
The password for logging into the FTP server is configured.
Step 5 Run:
nqa-ftp-record filename filename
The file name used for saving test results is configured.
----End
6.34.3 Enabling the Function of Saving NQA Test Results Through
FTP
The system can send test results to the FTP server only after the FTP server is enabled with the
test result saving function.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record enable
The FTP server is enabled to save test results.
----End
6.34.4 (Optional) Configuring the Number of Test Results Saved
Through FTP
This part describes how to configure the number of test results that an FTP server can save.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record item-num item-number
The number of test results to be saved on the FTP server through FTP is configured.
----End
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
6-131