Example For Configuring The Ftp Download Test; Figure 6-4 Networking Diagram For Configuring The Ftp Download Test - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

6.37.2 Example for Configuring the FTP Download Test

Networking Requirements
As shown in
l
l

Figure 6-4 Networking diagram for configuring the FTP download test

FTP Client
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure the IP addresses of Switch A and Switch B. The configuration details are not
mentioned here.
Step 2 Configure Switch B as the FTP server.
<SwitchB> system-view
[SwitchB] ftp server enable
[SwitchB] aaa
Issue 03 (2010-09-20)
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
return
Figure 6-4:
Switch B functions as the FTP server.
A user with the name user1 and the password hello intends to log in to the FTP server to
download the test.txt file.
SwitchA
GE1/0/0
VLANIF10
10.1.1.1/24
Configure Switch A as the NQA client.
Create and perform the FTP test on Switch A to check whether a connection between
Switch A and the FTP server can be set up and to check the time for downloading a file
from the FTP server.
IP address of the FTP server
Source IP address for the test
FTP user name and password
Operation file of the FTP test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchB
GE1/0/0
VLANIF10
10.1.1.2/24
6 NQA Configuration
6-143