Huawei Quidway S9300 Configuration Manual - Network Management page 625

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
[Administrator-1-cluster] quit
# Configure member switch 1.
[Member-1] cluster enable
[Member-1] cluster
[Member-1-cluster] mngvlanid 10
[Member-1-cluster] quit
# Configure member switch 2.
[Member-2] cluster enable
[Member-2] cluster
[Member-2-cluster] mngvlanid 10
[Member-2-cluster] quit
# Configure member switch 3.
[Member-3] cluster enable
[Member-3] cluster
[Member-3-cluster] mngvlanid 10
[Member-3-cluster] quit
After the topology collection function is enabled manually on the administrator switch, check
the device information collected through NTDP and you can find the MAC address and types
of related devices.
<Administrator-1> ntdp explore
<Administrator-1> system-view
[Administrator-1] display ntdp device-list
The device-list of NTDP:
------------------------------------------------------------------------------
MAC
------------------------------------------------------------------------------
0004-0004-0004
0003-0003-0003
0002-0002-0002
0001-0001-0001
Step 5 Create a cluster.
# On the administrator switch, set the range of IP addresses that can be assigned to the cluster
to 10.0.0.0/8, in which the IP address assigned to the administrator switch is 10.0.0.1/8.
[Administrator-1] cluster
[Administrator-1-cluster] ip-pool 10.0.0.1 8
# Create a cluster named HUAWEI on the administrator switch.
[Administrator-1-cluster] build HUAWEI
[HUAWEI_0.Administrator-1-cluster]
After the previous configuration, check information about the cluster to which the device
belongs. You can find that the device name is changed, the cluster name is HUAWEI, and the
management VLAN ID is 10.
[HUAWEI_0.Administrator-1-cluster] display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 sec
Handshake hold-time:60 sec
Issue 03 (2010-09-20)
HOP IP
2
1
1
0
NOTE
Following steps can be performed only on the administrator switch.
: 10
: disabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S9300
S9300
S9300
S9300
8 HGMP Configuration
8-129