Configuring The Tcp Test; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

6 NQA Configuration
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
<Quidway> display nqa results
NQA entry(admin, snmp) :testflag is inactive ,testtype is snmp
1 . Test 1 result

6.12 Configuring the TCP Test

This section describes how to configure a Transmission Control Protocol (TCP) test to check
the responding speed of a TCP port.

6.12.1 Establishing the Configuration Task

Before configuring a TCP test, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
6.12.2 Configuring the TCP Server
The IP address and number of the port monitored by the server must be identical with those
configured on the client.
6.12.3 Configuring the TCP Client
This part describes how to set TCP test parameters.
6.12.4 Checking the Configuration
After configuring the TCP test, you can view the test result.
6.12.1 Establishing the Configuration Task
Before configuring a TCP test, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
To obtain the time for the specified port to respond to a TCP connection request, you can create
an NQA TCP test instance.
6-30
The test is finished
Send operation times: 3
Completion:success
Attempts number:0
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:10.2.1.2
Min/Max/Average Completion Time: 63/172/109
Sum/Square-Sum Completion Time: 329/42389
Last Good Probe Time: 2006-8-5 15:33:49.1
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Issue 03 (2010-09-20)