Huawei Quidway S9300 Configuration Manual - Network Management page 460

6 NQA Configuration
<SwitchA> display nqa alarm
NQA Alarm Information:
---------------------------------------------------------------------------
Admin-Name
---------------------------------------------------------------------------
admin
admin
# Check the status of the NQA client.
<SwitchA> display nqa-agent
NQA Tests Max:2000
NQA Flow
nqa test-instance admin icmp
test-type icmp
destination-address ipv4 11.1.1.2
nqa status : normal
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.2
alarm 10 lost-packet-ratio absolute rising-threshold 80 10 falling-threshold 10
10
nqa status : normal
# Check the NQA test result.
<SwitchA> display nqa results
NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp
1 . Test 1 result
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result
6-240
Operation-Tag
icmpjitter
icmpjitter
Max:1000
The test is finished
Send operation times: 3
Completion:failed
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:11.1.1.2
Min/Max/Average Completion Time: 0/0/0
Sum/Square-Sum Completion Time: 0/0
Last Good Probe Time: 0-0-0 0:0:0.0
Lost packet ratio: 100 %
The test is finished
SendProbe:60
Completion:failed
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:0/0/0/0
NumOfRTT:0
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:0
Max Positive SD:0
Positive SD Number:0
Positive SD Sum:0
Positive SD Square Sum:0
Min Negative SD:0
Max Negative SD:0
Negative SD Number:0
Negative SD Sum:0
Negative SD Square Sum:0
Min Delay SD:0
Max Delay SD:0
Delay SD Square Sum:0
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:0
jitter out value:0.0000000
NumberOfOWD:0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Alarm-Entry AlarmType
10 Rising
10 Falling
NQA Tests Number:
NQA Flow Remained:1000
Receive response times: 0
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:3
Connection fail number:0
RTT Stats errors number:0
ResponseProbe:0
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:0
Drop operation number:60
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:0
Max Positive DS:0
Positive DS Number:0
Positive DS Sum:0
Positive DS Square Sum:0
Min Negative DS:0
Max Negative DS:0
Negative DS Number:0
Negative DS Sum:0
Negative DS Square Sum:0
Min Delay DS:0
Max Delay DS:0
Delay DS Square Sum:0
Packet Loss DS:0
Average of Jitter:0
Average of Jitter DS:0
jitter in value:0.0000000
Packet Loss Ratio: 100%
Event-Entry
10
10
2
Issue 03 (2010-09-20)