1 Layer 2 Multicast Configuration
Figure 1-2 Networking diagram for configuring static Layer 2 multicast for a VLAN
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create a VLAN.
# Create VLAN 3 on the S9300.
<S9300> system-view
[S9300] vlan 3
[S9300-vlan3] quit
1-28
DHCP server
IP/MPLS core
GE3/0/1
S9300
GE1/0/1
VLAN3
Host4
Host3
Create a VLAN.
Add interfaces to the VLAN.
Add interfaces to the multicast group statically.
ID of the VLAN
Type and number of each interface
Address of the multicast group
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Multicast source
Host5
Configuration Guide - Multicast
Issue 01 (2009-07-28)